This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Need help setting up VPN between Sophos UTM firewall and AWS VPC

Hello all,

I'm trying to set up a VPN connection between our Sophos UTM firewall and an AWS VPC, but I'm running into some issues. Our on-premises network has two subnets ( and that need to be connected to the AWS VPC, but I'm not sure how to configure the VPN connection properly.

I've followed the AWS official documentation to setup VPN Connection on AWS side.

Also, I've followed the steps in the Sophos UTM documentation to create the VPN connection, but when I try to establish the connection, it fails and I can only reach the AWS VPC from one of our subnets (either or I've checked the firewall rules and routing configuration on our Sophos UTM firewall, but I'm not sure what I'm missing.

The following VPN tunnel configurations have been tested on UTM Sophos side:

  1. Tunnel1Source: – GW (on AWS side) – Destination Subnet – WORKING

  2. Tunnel1Source: – GW (on AWS side)– Destination Subnet WORKING

  3. Tunnel1: Source: and – GW (on AWS side) – Destination Subnet   - Connection failed, only reachable from one source subnet, sometimes, sometimes - NOT WORKING

  4. Tunnel1: Source: – GW (on AWS side) – Destination Subnet

    Tunnel2: Source: – GW (on AWS side) – Destination Subnet

    After enabling second tunnel, connection lost - NOT WORKING

Can anyone provide some guidance on how to set up the VPN connection between Sophos UTM and AWS VPC with multiple subnets? Do I need to create multiple VPN connections, one for each subnet? What configuration changes do I need to make on the Sophos and AWS side?

Any help would be greatly appreciated. Thanks in advance!

This thread was automatically locked due to age.