Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 6 subscribers
  • Views 1017 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Two respond only site to site connection

Jeze Jet

Hello all,

I've been trying to create two site to site vpn's using respond only, It seems like there is some conflict happening. When I checked the site to site connection summary, It indicates the clients public IP but with the "Error : No connection" while the other respond only s2s is running as it should. Does anyone have any recommendation on how to fix this? Thanks in advance



This thread was automatically locked due to age.
  • 0

    Hi and welcome to the UTM Community!

    Please insert pictures of the Edits of the IPsec Connection and Remote Gateway for both sides.

    Also:

         1. Confirm that Debug is not enabled.
         2. Disable the IPsec Connection.
         3. Start the IPsec Live Log and wait for it to begin to populate.
         4. Enable the IPsec Connection.
         5. Copy here about 60 lines from enabling through the error.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Unfiltered HTML