Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 11 replies
  • Subscribers 6 subscribers
  • Views 2646 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Wrong time shown in Logging & Reporting

Jeff x

I don't know what to make of this. The time is correct in the Dashboard and in the log files but it's four hours ahead in all of the graphs in Logging & Reporting:

I also get the correct, local date/time when I SSH into the unit and run the date command. What would cause the time to be wrong in only the graphs?

Does anyone else see this on any of their UTM's?

I have tried installing Sophos UTM with and without ticking the Host is UTC time option during installation. I get the same results.



This thread was automatically locked due to age.
Parents
  • 0

    I've not seen this before and just checked mine by comparing the same two spots you have posted.

    Mine are matching times.

    OPNSense 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | ATT Fiber 1GB
    (Former Sophos UTM Veteran, Former XG Rookie)

  • 0 in reply to Amodin

    Is your time zone set to Etc/UTC? That is the only way that I get get the times to match.

    --------------------------------------------------------------------
    Sophos UTM 9.719-3 - Home User
    Virtual machine on Dell Optiplex 3070
    i3-9100 @ 3.60 GHz, 16 GB RAM
    --------------------------------------------------------------------

Reply
  • 0 in reply to Amodin

    Is your time zone set to Etc/UTC? That is the only way that I get get the times to match.

    --------------------------------------------------------------------
    Sophos UTM 9.719-3 - Home User
    Virtual machine on Dell Optiplex 3070
    i3-9100 @ 3.60 GHz, 16 GB RAM
    --------------------------------------------------------------------

Children
Unfiltered HTML