This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

DHCP Relay Adding 2 servers

Hi,

I need to add 2 servers to DHCP Relay option for a MECM (SCCM) platform.

With multiple networks, you have to add 2 dhcp relays to achieve PXE boot :

- one that points to the DHCP server

- a second one that points to the MECM/SCCM server

I don't find the way to do this in UTM9 as it only allows to add 1 host or an availability group which will only switch from one server to another if the first one is not responding.

Is there a way to do this with a command line?

Thanks



This thread was automatically locked due to age.
Parents
  • Salut et bienvenu - welcome to the UTM Community!

    Is this still an issue?  If so, maybe a simple diagram of your network topology would help us understand what you need.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • Salut et bienvenu - welcome to the UTM Community!

    Is this still an issue?  If so, maybe a simple diagram of your network topology would help us understand what you need.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data