This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

L2TP access

Hello All,

We are enabling L2TP on our peplink load balancer, I can access it and get an ip address and also ping successfully both ethernet interfaces that connects peplink to sophos utm9 but not the interface of umt 9 connected to the core switch. I added a static route to the switch but no change. Is it about permiting L2tp traffic ? Thank you 

utm9 forward all traffic to the SVI 



This thread was automatically locked due to age.
  • Salut Otman and welcome to the UTM Community!

    A load balancer in front of the UTM can cause problems with IPsec.  If you still need help with this, try the following:

         1. Confirm that Debug is not enabled for IPsec.
         2. Start the IPsec Live Log and wait for it to begin to populate.
         3. Try to connect.
         4. Copy here about 60 lines from the connection attempt through the error.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA