Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 6 subscribers
  • Views 792 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Route between 2 internal Networks

Prashanth Potharlanka

Hi everyone,

I'm relatively new to sophos and i have a following question.

I have Sophos UTM running on Virtual Windows machine, which has a DSL Link (static IP) with internal address to all the VMS 192.168.50.x

I have also another Connection running via Fritzbox with another DSL connection (static IP) with internal GW 192.168.0.1.

How can i route now between these 2 networks so that i could communicate Machines from 192.168.50.x networks to 192.168.0.x networks

Thanks

Prasahnth



This thread was automatically locked due to age.
Parents
  • 0

    Hallo namaste Prashanth and welcome to the UTM Community!

    The easiest would be to connect the Fritzbox and the UTM via Ethernet.  Assign, for example, the subnet 192.16.25.0/30 to the Interface in both devices with 192.168.25.1 on the UTM and 192.168.25.2 on the Fritzbox,  In the UTM, create a Static Route 192168.0.0/24->192.168.25.2 and a firewall rule like:

         (192.168.0.0/24 &192.168.50.0/24) -> Any -> (192.168.0.0/24 &192.168.50.0/24) : Allow

    Now, make the corresponding configuration in the Fritzbox.

    Any luck with that?

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0

    Hallo namaste Prashanth and welcome to the UTM Community!

    The easiest would be to connect the Fritzbox and the UTM via Ethernet.  Assign, for example, the subnet 192.16.25.0/30 to the Interface in both devices with 192.168.25.1 on the UTM and 192.168.25.2 on the Fritzbox,  In the UTM, create a Static Route 192168.0.0/24->192.168.25.2 and a firewall rule like:

         (192.168.0.0/24 &192.168.50.0/24) -> Any -> (192.168.0.0/24 &192.168.50.0/24) : Allow

    Now, make the corresponding configuration in the Fritzbox.

    Any luck with that?

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML