Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 6 subscribers
  • Views 2111 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Has anyone setup a site to site VPN to Zscaler?

ALFRED ARPUTHARAJ

Hi Everyone,

I am trying to setup a site to site VPN from my Sophos firewall to Zscaler. I'm trying to follow the Zscaler Guide (https://help.zscaler.com/zia/configuring-ipsec-vpn-tunnel) as much as possible with no success. While I do see the IP SEC as up, there is no traffic going through it. Does anyone have an example of a working IPSEC configuration to Zscaler? Screen captures of my setup are below for reference.

 



This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to ALFRED ARPUTHARAJ

    1. Confirm that Debug is not enabled.
    2. Disable the IPsec Connection.
    3. Start the IPsec Live Log and wait for it to begin to populate.
    4. Enable the IPsec Connection.
    5. Copy here about 60 lines from enabling through the error(s).

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Unfiltered HTML