Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 6 subscribers
  • Views 2167 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SG210 - adding a FTTP connection for all traffic except VOIP

Paul Kavanagh

Hi,

We have a Sophos SG210 UTM which has 1 NIC configured for Internal LAN and another NIC configured for a FTTC DSL WAN connection. Until now this WAN connection has been used for all internet traffic (Browsing, 365 Exchange Online, Site-Site IPSEC VPN, Remote Dial in SSL VPN).

We now have a 100/100 mbps FTTP WAN connection available and we would like to use this connection for everything except our VOIP phones - we would like to dedicate the FTTC connection for just the phones.

I have configured NIC 5 with the PPPoE details of the FTTP connection but haven't enabled it yet. Uplink balancing was automatically enabled when I added this configuration with both FTTC & FTTP connections set as Active Interfaces.

Do I need to setup Multipath Rules to achieve what I have outlined above?

Any info to give me a head start would be greatly appreciated. 

Thanks in advance for any help offered!

Paul.



This thread was automatically locked due to age.
Parents
  • 0

    Thanks very much Bob - that makes sense.

    The telephone company have confirmed to me that ALL VOIP traffic effectively originates at the onsite PBX so {phones} in your example will be the PBX.

    So, are the multipath rules sequential? Ie if rule 1 doesn't apply (device is not a phone) the firewall will go on to rule 2 etc?......

    I'll be testing today at 1630 so will let you know how it goes!

  • 0 in reply to Paul Kavanagh

    Right, Paul - anytime you see an ordered list in WebAdmin, the rules are processed sequentially until the packet qualifies for one and then no further rules are considered.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0 in reply to Paul Kavanagh

    Right, Paul - anytime you see an ordered list in WebAdmin, the rules are processed sequentially until the packet qualifies for one and then no further rules are considered.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML