Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 6 subscribers
  • Views 914 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SG115 USING LEFT PORTS AS A SWITCH

OLIVIER STEINBERG

Hello community, I have a SG115 configured with LAN port and WAN port. Due to racking in a datacenter, I'd to use the remaining ports eth2 eth3 as a switch.

Is it possible? If yes how?

Thank's

Olivier



This thread was automatically locked due to age.
Parents
  • 0

    You should not do this ...

    Possible it is working using a bridge-group ...

    but ... every packet is passing the CPU and you need a firewall-Rule for every packet ... non IP-traffic too.


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

Reply
  • 0

    You should not do this ...

    Possible it is working using a bridge-group ...

    but ... every packet is passing the CPU and you need a firewall-Rule for every packet ... non IP-traffic too.


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

Children
Unfiltered HTML