Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 7 subscribers
  • Views 1005 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Zoom To spefic WAN interface sophos utm 9.7

Magy

Hello.

I know how to multipath!

But i Dont know WHAT t multipath

I want each traffic that comes from Zoom Uses interface WAN2 wither zoom  web or zoom program or zoom mobile....

I dont know the links or ips that should be placed in  multpath!

Why sophos make it hard for us?? We are Doing their assignment HW omg?

Can;t they just make it easier !

Thanks Expecting help



This thread was automatically locked due to age.
  • 0

    Hala,

    UTM doesn't support DNS Group definitions like *.zoom.us.  DNS Group definitions must use a single FQDN.  There are dozens of subnets in the US.  I don't know where to find the subnets that should be used in Egypt.  Multipath rules only affect outbound traffic, but I assume that Zoom traffic originated from one IP will have responses sent to it.

    I don't think there's an easy way to do what you want to do.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0
    Magy said:

    Why sophos make it hard for us?? We are Doing their assignment HW omg?

    Because that goes way beyond the scope of a UTM, so don't blame Sophos.

    There is a lot more to just assigning traffic to an interface, and you are talking about routing traffic at what, Layer 3?  Yeah, not Sophos' fault here.

    You might want to ask your provider(s) to help you with that kind of routing.

    OPNSense 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | ATT Fiber 1GB
    (Former Sophos UTM Veteran, Former XG Rookie)

Unfiltered HTML