Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 7 subscribers
  • Views 1813 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Port 5060 and UDP 10000-20000

jaded

Hello.

We have a sophos UTM 9 in our company.

Our client gave the ports and then added in the Rules Tab but seems no luck.

TCP/UDP: 5060

UDP: 10000-20000

I am new to sophos. Appreciate your help.

Thanks,

Jade



This thread was automatically locked due to age.
Parents
  • FormerMember
    0 FormerMember

    Hey

    Is this in the context of Outbound traffic from Local to internet or are you concerned with allowing these ports in DNAT? 

    You can check tcpdump on these ports (tcpdump -nei any host x.x.x.x and port xxxx) or the packet filter logs ( tail -f  /var/log/packetfilter.log | grep -i "xxxx" [where xxxx is your port]) to verify the communication.

Reply
  • FormerMember
    0 FormerMember

    Hey

    Is this in the context of Outbound traffic from Local to internet or are you concerned with allowing these ports in DNAT? 

    You can check tcpdump on these ports (tcpdump -nei any host x.x.x.x and port xxxx) or the packet filter logs ( tail -f  /var/log/packetfilter.log | grep -i "xxxx" [where xxxx is your port]) to verify the communication.

Children
No Data
Unfiltered HTML