Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 5 subscribers
  • Views 1135 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Remote Access SSL VPN

Pawel Kazinski

Hello All,

I have recently added a new NIC to my UTM 9.705-3 and found that if I disable it (bring down the interface) my remote access ssl vpn no longer connects. I did not change anything on the vpn configuration and it works fine when all interfaces are UP. What is strange is that the new interface is not defined in the VPN configuration. Is this per design that all interfaces must be UP or is this a bug.

Your help would be greatly appreciated.

Thank you



This thread was automatically locked due to age.
Parents
  • FormerMember
    0 FormerMember

    Hi ,

    Thanks for reaching out, and welcome to the Sophos Community! 

    I've tried to replicate the issue as you described, and I can connect to SSL Remote VPN even with one interface Status/Link down. 

    Can you provide more detail regarding the interface that you disabled? Is it a WAN or LAN interface? 

    Thanks,

Reply
  • FormerMember
    0 FormerMember

    Hi ,

    Thanks for reaching out, and welcome to the Sophos Community! 

    I've tried to replicate the issue as you described, and I can connect to SSL Remote VPN even with one interface Status/Link down. 

    Can you provide more detail regarding the interface that you disabled? Is it a WAN or LAN interface? 

    Thanks,

Children
No Data
Unfiltered HTML