Random disconnection from the Internet: possibly from UTM?

How long has this been an issue? 

Did you check out BAlfson's Rulz sticky post for DNS related issues? 

Did it start when you implemented the UTM? 

Did it start after some kind of update to the UTM or hardware update by the ISP? 

What type of connection do you have through the ISP?

Have you checked any of the UTM logs to locate any errors in the logs? 

Did you check the Kernel message log for anything 'e1000' related (this could be a NIC issue)?

What changes have you made to the UTM configuration if any?

Do you have the correct UTM appliance to handle the # of clients and internet traffic?

I have some questions, as you can tell. 

Thank you for your reply Amodin,

How long has this been an issue? 

     It started yesterday morning.

Did you check out BAlfson's Rulz sticky post for DNS related issues? 

     I have in the past, I will review them again.

Did it start when you implemented the UTM? 

     No, we've had Sophos UTM's for years.

Did it start after some kind of update to the UTM or hardware update by the ISP? 

     No update to UTM, but we did upgrade our Internet speed.

What type of connection do you have through the ISP?

     1Gbps Fiber

Have you checked any of the UTM logs to locate any errors in the logs? 

      Yes, I haven't found any errors    

Did you check the Kernel message log for anything 'e1000' related (this could be a NIC issue)?

     Yes, none found, but quite a few "IPv4: martian source" entries

What changes have you made to the UTM configuration if any?

    None

Do you have the correct UTM appliance to handle the # of clients and internet traffic?

   Yes

Guys,

Great job of posting a problem, asking the range of questions needing an answer and responding.

I'll make a WAG and blame the ISP's equipment.  Does doing #7.7 in Rulz (last updated 2021-02-16) resolve this?

Cheers - Bob

Thank you Bob for your reply, I will review. 

I called support last night for assistance. The conclusion was that since I was able to connect a laptop directly to the LAN interface and access the Internet that the UTM wasn't to blame. 

I replaced our main Cisco smart switch (that helped), but after logging onto our Remote Desktop server it was not resolving websites, I switched from Google DNS forwarders to my ISP DNS and it immediately resolved.  Lots of weird little network issues like displayed "Limited" access on our server NIC team, but I have gigabit speeds.

I seem to be finding perhaps symptoms of a problem. I'm at work today searching for something plugged into the network that maybe causing these issues. I'll also look Rulz 7.7.

Thanks very much, I'll report back later!

Right now none of my stand alone PC's and Laptops can access the Internet. Our Remote Desktop server clients are online and things seems fine.

Have you tried using 1.1.1.1 as your DNS?   Flush your DNS on UTM any time you make a DNS change as well, it will help you with resolving issues of course.

Martian sources are usually something unreliable/unrouteable sources.  I am wondering if you have something rogue on your LAN or a weird config in a switch, one of those specific PCs or Laptops causing the issue, or bad port causing a problem - maybe even a duplicate MAC address somewhere - as weird and rare as it is, I've seen a total of five times where I have found an identical MAC on NIC cards.  One of the issues we found in the LAN caused a broadcast storm in a Cisco environment saturating a 2GB backbone, and it was a Cisco design flaw for supervisor modules. You may have a LAN configuration that just doesn't work.

One of the methods to test the PC/Laptop issue would be to have all those machines off except your RDP servers (because you said it was working, but clients were not), then start booting those PCs/Laptops up one a time and testing your connectivity after each one.  If you get to a point where either a PC or Laptop is booted on and ready, and you lose internet connectivity, shut it down, then test again. 

When you experience the outage on the LAN side, are you able to test anything on the WAN side of things?  For instance, can you access a webpage that you host, or be able to access VPN from the outside?  How long does the internet stay inaccessible to you?  Is there any monitoring you can toss in there on the LAN, even something like PRTG for a bit and see if that helps narrow things down?

Thanks for answering my questions BTW.  ;)

Good morning, thank you for suggestions. I'm on day (5) with same problem. I've got to start over and find what I've missed.

After watching Wireshark and UTM logs all day yesterday I'm considering this being a DNS issue.

We use the UTM as our DNS Proxy with Google DNS as Forwarders. Is his normal behavior for data in DNS Proxy log? It doesn't look like a lot of resolution is going on...

2021:03:30-09:54:27 chevy-fw named[5421]: resolver priming query complete
2021:03:30-09:54:31 chevy-fw named[5421]: resolver priming query complete
2021:03:30-09:54:37 chevy-fw named[5421]: resolver priming query complete
2021:03:30-09:54:39 chevy-fw/chevy-fw named: Last message 'resolver priming que' repeated 2 times, suppressed by syslog-ng on chevy-fw.dwaynelane.com
2021:03:30-09:54:39 chevy-fw named[5421]: resolver priming query complete
2021:03:30-09:54:41 chevy-fw named[5421]: resolver priming query complete
2021:03:30-09:54:43 chevy-fw/chevy-fw named: Last message 'resolver priming que' repeated 1 times, suppressed by syslog-ng on chevy-fw.dwaynelane.com
2021:03:30-09:54:43 chevy-fw named[5421]: resolver priming query complete
2021:03:30-09:54:44 chevy-fw/chevy-fw named: Last message 'resolver priming que' repeated 1 times, suppressed by syslog-ng on chevy-fw.dwaynelane.com
2021:03:30-09:54:49 chevy-fw named[5421]: resolver priming query complete
2021:03:30-09:54:52 chevy-fw named[5421]: resolver priming query complete
2021:03:30-09:54:54 chevy-fw named[5421]: resolver priming query complete
2021:03:30-09:54:58 chevy-fw named[5421]: resolver priming query complete
2021:03:30-09:55:00 chevy-fw/chevy-fw named: Last message 'resolver priming que' repeated 1 times, suppressed by syslog-ng on chevy-fw.dwaynelane.com
2021:03:30-09:55:00 chevy-fw named[5421]: resolver priming query complete
2021:03:30-09:55:03 chevy-fw named[5421]: resolver priming query complete
2021:03:30-09:55:04 chevy-fw/chevy-fw named: Last message 'resolver priming que' repeated 1 times, suppressed by syslog-ng on chevy-fw.dwaynelane.com
2021:03:30-09:55:05 chevy-fw named[5421]: resolver priming query complete
2021:03:30-09:55:07 chevy-fw/chevy-fw named: Last message 'resolver priming que' repeated 2 times, suppressed by syslog-ng on chevy-fw.dwaynelane.com
2021:03:30-09:55:07 chevy-fw named[5421]: resolver priming query complete
2021:03:30-09:55:09 chevy-fw/chevy-fw named: Last message 'resolver priming que' repeated 1 times, suppressed by syslog-ng on chevy-fw.dwaynelane.com
2021:03:30-09:55:09 chevy-fw named[5421]: resolver priming query complete

Yes, those are DNS issues.  I would change from Google DNS to OpenDNS (1.1.1.1/1.0.0.1) and see what happens.  For testing purposes at least.  I believe those are forwarding query errors.

I changed DNS Forwarders to Open DNS, I'll keep monitoring logs.  What is a "revolver priming query?"

Our Sophos seems to be blocking some DNS traffic, after I switched to Open DNS I saw these packets were blocked.