This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos UTM "Cisco VPN Client" -- Interfaces missing "Additional Addresses"

Regarding: https://support.sophos.com/support/s/article/KB-000034262?language=en_US

Sophos UTM v9.705-3

"Free" Home License

When configuring the "Cisco VPN Client" ... the Interfaces pulldown only list the IP address of the physical interface.

In the INTERFACES & ROUTING, we have a range of "Additional Addresses" (public IPs)

These "Additional Addresses" are not listed in the Interface option when configuring the "Cisco VPN Client"

We want to test "Cisco VPN Client" using an alternate "Additional Address" public IP

Please advise how to proceed



This thread was automatically locked due to age.
  • Hi V.M. and welcome to the UTM Community!

    Not possible.  Not sure why you want to use a different IP, but you might be able to test from inside by specifying the "Internal" interface in 'Server Settings'.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • Besides the existing configuration that uses the “outside interface” main IP for other services... if Sophos UTM is supposed to be the public presence for a block of public IPs... why would not all public IPs (not physical interfaces) be useable for this? 

  • No idea - just telling you how it works.  If you want to have another IP visible to the outside world for the Cisco Client, you will need a switch in front of the UTM and to move the desired IP from Additional Addresses to be the primary IP of another WAN interface.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA