Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 6 subscribers
  • Views 675 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

DNS resolving only single IP - when 3x A records exist

zzzp8

Hi there

We are using FQDN's on SSLVPN , to push out specific routes to VPN users for specific domains. This force tunnels traffic to specific domains across the SSLVPN.

This works fine when there is 1x IP mapped to a single DNS record (FQDN). However when there are 3x IP's mapped as A records to a DNS record (FQDN) , the SophosUTM only picks up 1x IP. 

Therefore users only see one route, where as they should see 3x.

When doing a DNS Resolution from Support > Tools > DNS lookup  ... the firewall successfully resolves 3x IP's attached to a FQDN. However any network objects/definition only show 1x IP

How can I make the firewall create network objects based on DNS name and map all A records attached - in this case to show all 3x IPs

Thanks 



This thread was automatically locked due to age.
Unfiltered HTML