Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 7 subscribers
  • Views 4170 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RSA-Authentication Manager und das RADIUS-Protokoll auf der UTM 9.

Sophos User3303

DE

Guten Tag, Wir haben ein solches Problem bei der Installation von RSA-Authentication Manager und das RADIUS-Protokoll auf der UTM 9.

Die RSA-Radius Server Installation war erfolgreich installier, aber nach dem Authentifizierungstest des Benutzers wird dieser Fehler angezeigt.

EN

Good day, We have such a problem when installing RSA Authentication Manager and the RADIUS protocol on the UTM 9. The RSA-Radius Server installation was successful, but this error is displayed after the user authentication test.

User authentication live log.

2020:11:13-09:11:42 fw1-1 aua[22600]: id="3006" severity="info" sys="System" sub="auth" name="Spawned child for authentication test"
2020:11:13-09:11:42 fw1-1 aua[22600]: id="3006" severity="info" sys="System" sub="auth" name="Bind test request: radius"
2020:11:13-09:11:42 fw1-1 aua[22600]: id="3006" severity="info" sys="System" sub="auth" name="Bind test successfull. Method: radius"
2020:11:13-09:11:50 fw1-1 aua[22607]: id="3006" severity="info" sys="System" sub="auth" name="Spawned child for authentication test"
2020:11:13-09:11:50 fw1-1 aua[22607]: id="3006" severity="info" sys="System" sub="auth" name="Authentication test request: m:radius, f:endpoint, u:testrsa, ip:0.0.0.0, host:"
2020:11:13-09:11:52 fw1-1 aua[22607]: id="3006" severity="info" sys="System" sub="auth" name="failed to recv packet from radius server: bad response authenticator (EBADAUTH)"
2020:11:13-09:11:52 fw1-1 aua[22607]: id="3006" severity="info" sys="System" sub="auth" name="Authentication test failed: failed to recv packet from radius server: bad response authenticator (EBADAUTH)"

RSA SECURITY CONSOLE - Authentication Monitor

Principal authentication User “testrsa” attempted to authenticate using authenticator “SecurID_Native”. The user belongs to security domain “SystemDomain” Authentication method failed, passcode format error testrsa fw1.domene.de 99.99.99.130 99.99.99.99 N/A



This thread was automatically locked due to age.
Parents
  • 0

    Hallo - Herzlich willkommen hier in der Community !

    I'm not familiar with the RSA-Authentication Manager, just the Windows version of RADIUS.  Are you certain that you have a RADIUS rule defined for testrsa with the agent" identifier?

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0

    Hallo - Herzlich willkommen hier in der Community !

    I'm not familiar with the RSA-Authentication Manager, just the Windows version of RADIUS.  Are you certain that you have a RADIUS rule defined for testrsa with the agent" identifier?

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
Unfiltered HTML