Thread Info
  • State Not Answered
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 31 replies
  • Subscribers 6 subscribers
  • Views 9057 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos UTM - IPv4/IPv6 Issue - IPSec

Sophos User438

Hi guys,

I have searched myself silly and dont get anywhere, so I come before you.

 

A little preface:

We are a small group of companies (headquarter/main company and 2 daughtercompanies/branches). There are 2 IPSec Site-2-Site tunnels established between the two branches and the headquarter (we, the HQ, are on respond since the branches dont have static IP's yet) - they work on a RDS/Terminalserver in our infrastructure.

We have just the worst WAN connection (Vodafone cable) - atrocious. Its on and off again - major disruptions etc. We are so remote that we dont have any alternatives like fiber (the DSL connection is solely for our VPN connection to the hosted cloud VoIP PBX of Deutsche Telekom), so we are stuck with Vodafone. It wasnt always as bad as now, but I have to provide redundancies now since 3 companies are affected.

I asked our mobile provider for a data plan and they can offer me a LTE data plan with a static, public IPv6 address. According to the sales rep I spoke to, it will allow incoming connections as well, but I need to verify with one of their technicians directly - lets assume it is.


I planned something like this:

 

I really dont want to establish a full blown IPv6 network in parallel to the IPv4. I saw here and there some blog posts and comments on the net (and Sophos forum) explaining the translation of IPv6 traffic to IPv4 and vice versa. 

How would I realise that on the UTM? With a DNAT rule?

Im eternally grateful for any input.

Thanks!



This thread was automatically locked due to age.
Parents
  • 0

    Hallo and welcome to the UTM Community!

    I'm not familiar with the Mikrotik - can it do IPv6-to-IPv4?  Do you have UTMs in the branches, or are these other brands?

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson

    Hi Bob!

    Thanks for the reply - almost lost hope :)

     

    Sorry, should have been more clear on that:

     

    Main office: SG135 UTM

    Branch1: SG125 UTM

    Branch2: SG115 UTM

     

    The Mikrotik antenna has the so called "routerOS", but I activated the passthrough mode (similar to the bridge mode on a router), so the Mikrotik only uses the built-in LTE modem to forward the public IP - this has been tested and confirmed by me.

     

    Thanks and best regards

     

    Constantin

  • 0 in reply to Sophos User438

    Hi Constantin,

    just curious: why do you use LTE on both ends?

    Mit freundlichem Gruß, best regards from Germany,

    Philipp Rusch

    New Vision GmbH, Germany
    Sophos Silver-Partner

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to BAlfson

    Hey Bob.

    No, before I started to the deploy the tunnels etc. I went to Branch1 and put their Zyxel 5501 into Bridgemode, letting the UTM PPPoE connect. On our side is the Mikrotik LHG LTE6 antenna also in bridgemode, which gives eth7 ("LTE_Backup" interface) the IPv6 address through DHCP.

    The MTU discovery feature was not activated on both ends - I will test today and post my results.

     

    @Philipp

    Hi. The LTE connection is only on our side as a backup, if and when that damn Vodafone cable connection fails again. On the branch side we have a regular DSL (dualstack) connection.

     

    Best regards,

    Constantin

  • 0 in reply to BAlfson

    Hey Bob,

    I activated the Path MTU Discovery on the Remote Gateways in both UTMs. It did not help at all. When the IPv6 tunnel is up, no pings are going through - I just get timeouts. I thought it might be something with the packetfilter, but the automatic firewall rules are activated on both sides. I did create the IPv6 tunnel the same way than its IPv4 counterpart and the working RDP connection is proof that there is nothing in the way.

    How could I zero in on this problem? Do we have to tcpdump on eth7? Im not sure what else I could check. 

    Thanks and best regards,

    Constantin

  • 0 in reply to Sophos User438

    Hint: maybe it would be much more simple/reliable when not using LTE on BOTH ends?

    What was the reason for doing it like this?

    Mit freundlichem Gruß, best regards from Germany,

    Philipp Rusch

    New Vision GmbH, Germany
    Sophos Silver-Partner

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to PhilippRusch

    Hi Philipp,

    did you not read my earlier reply? Only on our end (headquarters) is the LTE antenna. In Branch1 one is, as I said before, a regular DSL connection.

     

    Best regards,

    Constantin

  • 0 in reply to Sophos User438

    OK - I see!

    Mit freundlichem Gruß, best regards from Germany,

    Philipp Rusch

    New Vision GmbH, Germany
    Sophos Silver-Partner

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to Sophos User438

    Did you check the firewall log, Constantin, to see if pings are blocked there?  If they are, see #2 in Rulz (last updated 2019-04-17).

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson

    Hey Bob,

    I observed on both sides the Live Log of the firewall and there are no drops of any kind when I try to ping (I also turned off IPS and ATP), only timout:

     

     

    Not sure what else we could do. Can we listen "inside" the tunnel with tcpdump? So we know that the ping at least went into the tunnel?

    Thanks and best regards,

    Constantin

     

  • 0 in reply to Sophos User438

    First, we need the REF_ of the tunnel.  If "Branch 1" is the name of the IPsec Connection, which we can find with:

    cc get_object_by_name ipsec_connection site_to_site 'Branch 1'|grep \'ref

    That will return something like REF_IpsSitBranch1.

    To watch the traffic in the tunnel:

    espdump -n --conn REF_IpsSitBranch1 -vv

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson

    Hey Bob,

    now Im really confused. The ping clearly goes into the tunnel and is even noticed on the other side.

     

     

    Branch1:

     

    HQ:

    Not sure what else to do here. I checked all the logs - firewall, IPS, ATP - in the end I turned off intrusion prevenion and atp but that didnt help in any way.

    Do you have another approach?

    Thanks and best regards,

    Constantin

Reply
  • 0 in reply to BAlfson

    Hey Bob,

    now Im really confused. The ping clearly goes into the tunnel and is even noticed on the other side.

     

     

    Branch1:

     

    HQ:

    Not sure what else to do here. I checked all the logs - firewall, IPS, ATP - in the end I turned off intrusion prevenion and atp but that didnt help in any way.

    Do you have another approach?

    Thanks and best regards,

    Constantin

Children
No Data
Unfiltered HTML