Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 6 subscribers
  • Views 515 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Best way to change administrative IP address of UTM and APs

Christian Camacho

Hi Guys,

We have APs controlled by a SG230 UTM. We have to change the both, the UTM and the AP's IP addresses to a different subnet. Both the old and new subnets are routeable. How would you advise to change the administrative IP address of the devices to minimize the outage window?.

Thank you,

/Christian



This thread was automatically locked due to age.
  • 0

    depends of your networkdesign...

    possible you create a second subnet with new address-range at the same L2 network, change DHCP to deliver the new addresses only, reconfigure some devices to new addresses and remove the old network when empty...

    AP's should reconnect with new IP after reboot. (allow new IP-Interface within AP-settings)


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

Unfiltered HTML