Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 6 subscribers
  • Views 655 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Uplinking switches

MAV41

We have 4 switches that we would like to uplink directly to a SG 230 with a flexport module. Our network will have 3 VLANs without much inter vlan traffic. How does the SG 230

Need to be configured to allow for this configuration?

Thanks.



This thread was automatically locked due to age.
Parents
  • 0

    More Details = better answers.

    Please tell us something about your network-design.

    Some options:

    You should link the switches with VLAN-trunc and build one VLAN-trunc to SG too.

    Then SG can be the routing instance for the VLAN's and you are able to configure Firewall-Rules internally.

     

    If you use l3 switches the switches can make the routing.

     

    If your switches are (virtual-)stackable you can connect two or more links from different switches to the SG. here you need LACP functionality.

     

     


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

  • 0 in reply to dirkkotte

    Will use only layer 2 switches (Aruba 2530), all switches located in same room as SG 230 so I was thinking of uplinking these to SG via Ethernet copper cables.

Reply Children
No Data
Unfiltered HTML