Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 2 replies
  • Subscribers 5 subscribers
  • Views 1915 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Cannot access AP55 via console.

Gergö Karpati

 Hi there,

 

Anyone any ideas how to get into the console of the AP?

simply pressing enter does not work, s suggested here: 

https://community.sophos.com/products/unified-threat-management/f/wireless-security/56598/accesspoint-howto-troubleshoot-on-console

 

thanks in advance! 



This thread was automatically locked due to age.
Parents
  • +1

    Hi Gergö,

    access via RS232 was a "Bug" that is closed now. You can use awetool instead.

    Just enter awetool in the cmdline of the UTM, then select (3 Add firewall rule) and (1 Connect to an AP).

    bye Josef

    BERGMANN engineering & consulting GmbH, Wien/Austria

Reply
  • +1

    Hi Gergö,

    access via RS232 was a "Bug" that is closed now. You can use awetool instead.

    Just enter awetool in the cmdline of the UTM, then select (3 Add firewall rule) and (1 Connect to an AP).

    bye Josef

    BERGMANN engineering & consulting GmbH, Wien/Austria

Children
Unfiltered HTML