Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 6 subscribers
  • Views 2069 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SSL VPN no connection after Remote Desktop

Simon Mischler1

Hi All

 

I have a strange behavior with a SSL VPN (remote access), I can establish the connection and I'm able to ping the hosts in the network.
But after I tray to connect to a host with Remote Desktop, means I login in to a host, I'm not longer able to ping a host. Also the remote desktop connection drop.

The VPN status is still green, but also the other end of the tunnel (10.242.2.1) i not pingable.

Any ideas what I could tray?

 

Thanks a lot!

 

Best regards

 

Simon



This thread was automatically locked due to age.
Parents
  • 0

    Hallo Simo and welcome to the UTM Community!

    I tend to agree with Dave that compression can cause problems - especially when using UDP.  I recommend using UDP 1443 for the SSL VPN and do not know of any problems with that except that some Europeans have reported UDP blocks in some hotels.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0

    Hallo Simo and welcome to the UTM Community!

    I tend to agree with Dave that compression can cause problems - especially when using UDP.  I recommend using UDP 1443 for the SSL VPN and do not know of any problems with that except that some Europeans have reported UDP blocks in some hotels.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML