This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Fibre Connection on XG105

Hi All,

I have the XG 105 however my connection from the ISP is through fibre. On the XG 105 there is a fibre port i have inserted the fibre module and i would like to know how to configure that zone to become the main WAN zone on the firewall.

Thanks

This thread was automatically locked due to age.

Parents

0 Jaydeep over 5 years ago

Hi Paul Makameri

You will require to create that Interface in the WAN zone and then use it as Primary Gateway in Firewall rules. Or you may also configure a WAN link failover configuration using this KBA: Sophos XG Firewall: How to configure redundant internet connection using WAN Link Manager feature and use the Fiber connection as an Active WAN link.

Regards

Jaydeep
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Jaydeep over 5 years ago

Hi Paul Makameri

You will require to create that Interface in the WAN zone and then use it as Primary Gateway in Firewall rules. Or you may also configure a WAN link failover configuration using this KBA: Sophos XG Firewall: How to configure redundant internet connection using WAN Link Manager feature and use the Fiber connection as an Active WAN link.

Regards

Jaydeep
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data