Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 9 replies
  • Subscribers 6 subscribers
  • Views 4741 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

404 Error

gr33ny

Hello

I have an SG210 running FW 9.605-1

We have a problem where when we navigate to a particular web page we get a "404 Page Not Found" error.  The webpage is for a client system and I cannot share the URL.

I can tell you that we use the Web Proxy with Decrypt & Scan turned on and that I have created an exception (a long time ago) for this webpage to bypass the proxy.

Whether the user is going via the proxy or is excluded from it entirely, it is not possible to load the page.

As I would expect, there is no log of this page being accessed in the Web Filter log.

If I give my laptop a public IP address to bypass the UTM entirely the web page loads without issue.

Historically this webpage has worked without issue.  The only recent change is migrating to 9.6-051.

I'm unsure where else to look in the UTM to resolve this problem.

Many thanks



This thread was automatically locked due to age.
Parents
  • 0

    do you see the access within firewall log?

    try to ping the webpage-name from within your lan ... is the IP-correct?

     


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

  • 0 in reply to dirkkotte

    Thanks for your reply

    There is nothing in the FW log and I when I ping the domain it resolves the IP but times out (also does this outside of the UTM).

    Many thanks

Reply Children
  • 0 in reply to gr33ny

    Without webproxy (or with a proxy exception) you should see the access request as allowed or blocked...

    Check firewall and enable logging at the necessary rule.

    Do you see the same IP inside the LAN as outside the lan?

    use traceroute to the WebServer-IP to check the packets really going to the internet.

     


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

  • 0 in reply to dirkkotte

    Thanks for your reply

     

    I've raised a service ticket with Sophos and will update the forum post when I have a resolution

  • 0 in reply to gr33ny

    Does it work bypassing the proxy?
    If yes, try to disable pharming protection if you are in transparent mode. 

  • 0 in reply to MasterRoshi

    Hello

    Thanks for your reply, bypassing the proxy does not fix the problem.

    In fact, a "standalone" laptop not using the proxy at all and simply using the UTM as an Internet Gateway/DNS server also can't access the URL and gets a 404.

  • 0 in reply to gr33ny

    To me this seems like its either a DNS or routing issue (if it's a UTM problem). 

    Otherwise it might be server side settings that only allow certain IP's to access this server. 

    Since we don't know the URL and can't see the environment, it is probably best to open a support case. 

  • 0 in reply to gr33ny

    404 is a server side answer.

    if you got it while bypassing the proxy too, this message isn't from UTM.

    i think you masquerade the traffic with UTM-IP? Possible to try using the notebook with UTM-IP directly? (without UTM/while disconnecting UTM)


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

  • +1 in reply to dirkkotte

    This is now resolved, the web developer needed to make some back-end changes to stop the connection being dropped.

     

    Thanks for all your replies.

Unfiltered HTML