This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

firewall rules are not work

Hi all,

i have an UTM 9  sg210, i set 5 vlan on my switch, i permit all on the switch

and create some sub-interface from one physical interface on the UTM

i set  interface vlan for each sub-interface

currently Sophos is blocking everything between vlan

but when i set firewall rule for allowing Something between vlan i does not work

 

what i want is to control trafic between vlan on the Sophos UTM 9

 

someone can help for that?



This thread was automatically locked due to age.
Parents
  • Do you configure the vlan trunc at switch interface correctly?

    Try to ping sophos interface (default gateway) from device connected to vlan. Do this with every vlan.

    You should reach the sophos interface from within the vlan.


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

  • At switch port i have a trunk toward the UTM interface

    From connected device i can ping the UTM interface which is the default gateway

  • you are able to ping from every VLAN to default gateway...?

    Open Firewall-live-log while trying to access something over Firewall.

    i would try a ANY-rule first. Source any - service any - destination any.


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

  • Hello,

    Just checkin' to see if the information provided was helpful.

    Try this as an outbound rule.

    But be aware that it will block much more than your browser.

     

     

    _____________________________________________________________
    routertable

Reply Children
No Data