This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Blocked by Router - Sophos UTM

It appears that my router / firewall is blocking Synergy from starting. What external ports / protocols are required for Synergy 2 to function? When I switched networks and restarted the service, Synergy connected immediately, but on my other network, protected by Sophos, it appears that I need to open some things up.

Any advice would be appreciated.

Thanks.

This thread was automatically locked due to age.

0 Argo over 5 years ago

Hi Mikko Anhoco,

please refer to Synergy for this information alternatively, you can use livelog to find the ports required, or the firewall logs.

XG & UTM Architect (Systems: XG v18 & UTM 9.7 - Virtual, HW & SW)
Curious enough to take it apart, skilled enough to put it back together, Clever enough to hide the extra parts when I'm Done!
Cancel
Vote Up 0 Vote Down

Cancel
0 BAlfson over 5 years ago

Hi Mikiko and welcome to the UTM Community!

As Argo says, start with #1 in Rulz (last updated 2019-04-17).

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel