Thread Info
  • Locked Locked
  • Replies 4 replies
  • Subscribers 8 subscribers
  • Views 2410 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Slow User Admin / Timeout issues ? - Try this fix...

vicegod

Firmware version: 9.601-5 and before

I have had "general" slow responses on the WebAdmin website, and the recent update seemed to slow things down even more with timeouts etc... possibly a loopback effect?

I also have a throttle on QoS "Download Throttle" on HTTP and I found a huge improvement turning off the Throttle... obviously not the fix I wanted.

So the fix...

Web Protection > Filtering Options > Misc : Transparent Mode Skiplist
Add the domain name/IP of your WebAdmin to "Skip Transparent Mode Destination Hosts/Nets" and "Apply"

Give the UTM a bit of time to warmup and I'm sure you'll notice a performance improvement .

Cheers

Craig

 



This thread was automatically locked due to age.
Parents

  • Hi Craig,

    Your solution is good for users that have changed the HTTPS port back to 443and are in Transparent.

    I confirm that using the Proxy with any UTM is a problem.  I use Standard mode and skip the Proxy for all of my clients in 'LAN Settings' [Advanced].

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply

  • Hi Craig,

    Your solution is good for users that have changed the HTTPS port back to 443and are in Transparent.

    I confirm that using the Proxy with any UTM is a problem.  I use Standard mode and skip the Proxy for all of my clients in 'LAN Settings' [Advanced].

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML