Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 6 subscribers
  • Views 1405 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

2 subnets on sg210 1 wan, only 1 subnet sees internet.

Arnold Fischer

Subnet 1 192.168.0.X sees the internet subnet 2 10.0.0.x can not. I created firewall rules telling subnet 10x to have any access yet nothing. What am I missing?

 



This thread was automatically locked due to age.
Parents
  • 0

    How is your default route/gateway configured?

    Have you tried tracerouting to an external address to see where the traffic goes?

    Is the Masq rule set up correctly?

    Have you checked the firewall log to see if you have a conflicting rule that drops the traffic?

Reply
  • 0

    How is your default route/gateway configured?

    Have you tried tracerouting to an external address to see where the traffic goes?

    Is the Masq rule set up correctly?

    Have you checked the firewall log to see if you have a conflicting rule that drops the traffic?

Children
No Data
Unfiltered HTML