Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 5 subscribers
  • Views 1691 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Multiple WAN and assigning particular one to a user group or VLAN

icbbne

Below screenshot shows our multiple WAn interfaces. Currently all running as load balancing to each other. I would like to configure and assign WAN4OPTUS for only web servers.

WAN2 and 3 only for users (Active Directory currently integrated)

How can I do that?



This thread was automatically locked due to age.
  • 0

    Hi icbbne,

    have you tried multipath rules?

    There you can define which source, service and destination ist sent over your disered interface.

    E.G:

    Source: Wireless VLAN
    Service: ANY
    Destination: Internet
    Bound to Interface: WAN1

    The option skip rule by interface error could be ticked but keep in mind if the WAN1 is down no internet access is available for wireless vlan.

    Best Regards
    DKKDG

Unfiltered HTML