Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 7 subscribers
  • Views 3591 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

HTML5 VPN Portal - Dynamic RDP Host

PeterAuld

Hi,

I'm are currently reviewing our remote access policies & hardware.

In the past when we looked at the Sophos UTM HTML5 VPN Portal, it would only allow you to connect to statically defined RDP hosts.
I'm wondering if this is still the case? Or can it connect to something dynamic, e.g. an attribute pulled from the AD like the username of the user thats logged in.

 

Thanks

Peter



This thread was automatically locked due to age.
  • 0

    I have seen no feature changes for HTML5 VPN to RDP.

  • 0

    Hallo Peter - your first post here - welcome to the UTM Community!

    The best use of the HTML5 remote access method is for allowing an external service provider to gain access to a specific device.  It is a very resource-intensive method, so if you will ever want to have more than one person connecting at a time or to allow a person to access multiple devices, the SSL VPN method is your best bet.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson

    fully agree with Bob. HTML5 Portal was never build to replace any kind of SSL / IPsec RAS. 

    It has his limitation regarding setup and performance. 

    __________________________________________________________________________________________________________________

Unfiltered HTML