Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 6 subscribers
  • Views 4912 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

how to activate VLAN that is configured in the core switch and pass through to the SOPHOS.

Jeremiah Jamerlan

We have a core switch and a VLAN was configured there and the core switch is configure to the sophos,

but i think the sophos is blocking the VLAN that is configured to the core switch

 

I need a help on how to activate or unblock the VLAN on the sophos so that the VLAN can be used.



This thread was automatically locked due to age.
Parents Reply
  • 0 in reply to Jeremiah Jamerlan

    Maybe for testing purposes, but i said that will be sufficient that configuring the port in the switch in access mode. VLAN ip range must be the same as UTM ip Range.
    If you have more than a VLAN, than you have to configure them in UTM and make firewall rules to allow traffic from VLAN to VLAN.

     

    Maybe a picture of your topology will help.

Children
No Data
Unfiltered HTML