Related
Recommended
RichBaldry

We've just released UTM 9.707. As usual, the release will be rolled out in phases:

  • In phase 1 you can download the update package from our download server.
  • During phase 2 we will make it available via our Up2Date servers in several stages.
  • In phase 3 we will make it available via our Up2Date servers to all remaining installations.

Up2date information

News

  • Maintenance release
  • Security release

Remarks

  • System will be rebooted
  • Configuration will be upgraded

Issues resolved

  • NUTM-12550 [Access & Identity] Replace deprecated option in SSLVPN client config
  • NUTM-12310 [Email] SPF checks incorrectly occurring when multiple upstream hosts are configured in an availability group
  • NUTM-12672 [Logging] IPFIX does not switch source and destination ports between inbound and outbound side of flow
  • NUTM-12749 [Basesystem] Update bzip2 to address CVE-2019-12900
  • NUTM-12590 [Basesystem] Patch OpenSSL against CVE-2021-23840 & CVE-2021-23841
Parents

  • Hi,

    I just had an odd experience with by SG 115W and Up2Dateand want to see if I should be concerned and if anyone else has seen this. A couple of weeks ago (mid August 2021) I update the firmware to what I believed at teh time was current. Then today when checking the system, it says I need to update the firmware for both versions 9.706, and and 9.707, which I though I had already done. Started by updating them singly (9.706-9), and it hung up in the Post-stop phase. I logged back into the system, and now it says it is up to date with version 9.706. So:

    1) Is it on version 9.707 or 9.706?

    2) if it is 9.706, did I just roll it back?

    3) how do I fix it?

    4) Can I trust the version that was installed?

    5) other comments ....

    Thanks,

Comment

  • Hi,

    I just had an odd experience with by SG 115W and Up2Dateand want to see if I should be concerned and if anyone else has seen this. A couple of weeks ago (mid August 2021) I update the firmware to what I believed at teh time was current. Then today when checking the system, it says I need to update the firmware for both versions 9.706, and and 9.707, which I though I had already done. Started by updating them singly (9.706-9), and it hung up in the Post-stop phase. I logged back into the system, and now it says it is up to date with version 9.706. So:

    1) Is it on version 9.707 or 9.706?

    2) if it is 9.706, did I just roll it back?

    3) how do I fix it?

    4) Can I trust the version that was installed?

    5) other comments ....

    Thanks,

Children
No Data
Unfiltered HTML