Help us enhance your Sophos Community experience. Share your thoughts in our Sophos Community survey.

[BUG] No Traffic through Tunnel possible (from external)

Hi,

I try to replace a RED10 by a red50.
I established the red50 tunnel with one WAN interface and one UTM entry.

I switched the Interface to red50. But now there is no traffic possible.

ASG has no NAT, RED50 is behind NAT. 

Sven
Parents
  • Not as far as I know. RED50 however requires port 3400 and 3410. Not sure if that is blocked somewhere on the way?
  • Hi,

    port 3400 is not blocked, because my red10 is working very well throught same uplink.

    port 3410 should not be blocked. There are no error in the firewall log.
    I have the same no pong count as discribed in the other thread.

    2012:10:17-17:29:18 asg01 red_server[12678]: A***xx: PING remote_tx=0 local_rx=0 diff=0
    2012:10:17-17:29:18 asg01 red_server[12678]: A***xx: PONG local_tx=0 


    How do I check the 3400/3410 ports?

    I tried a telnet to 3400 and I am getting a connection.
    When I try to connect to 3410 via telnet I am getting an Connection Error.

    Sven

    Astaro user since 2001 - Astaro/Sophos Partner since 2008

Reply
  • Hi,

    port 3400 is not blocked, because my red10 is working very well throught same uplink.

    port 3410 should not be blocked. There are no error in the firewall log.
    I have the same no pong count as discribed in the other thread.

    2012:10:17-17:29:18 asg01 red_server[12678]: A***xx: PING remote_tx=0 local_rx=0 diff=0
    2012:10:17-17:29:18 asg01 red_server[12678]: A***xx: PONG local_tx=0 


    How do I check the 3400/3410 ports?

    I tried a telnet to 3400 and I am getting a connection.
    When I try to connect to 3410 via telnet I am getting an Connection Error.

    Sven

    Astaro user since 2001 - Astaro/Sophos Partner since 2008

Children
No Data