Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 3 replies
  • Subscribers 14 subscribers
  • Views 11676 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SOPHOS AP 55 .. MESH CONNECTION

Proudmore

 hi 

good day..

Can i configure mesh in AP 55 as of the moment (2-03-2017) for utm 9.407-3?

 

TIA


#Proudmore



This thread was automatically locked due to age.
Parents
  • +1

    Hi,

     

    Mesh support is available since

    • SG: all UTM 9.35, 9.4 . Versions before 9.35 should support it as well but I cannot quote it exactly for every single version
    • XG : 16.0 (was made available with first maintenance release), 16.5 . SFOS 15 only supports mesh for AP50 .
    • Sophos Wireless: in general

     

    Mesh on AP55/AP100 can be configured for the following bands:

    • SG: 2.4 Ghz only
    • XG: 2.4 Ghz only
    • Sophos Wireless: 2.4 Ghz and 5 Ghz

     

    AP55/100 includes C and X models.

     

    Kind regards,

     

    Dirk Bolte

Reply
  • +1

    Hi,

     

    Mesh support is available since

    • SG: all UTM 9.35, 9.4 . Versions before 9.35 should support it as well but I cannot quote it exactly for every single version
    • XG : 16.0 (was made available with first maintenance release), 16.5 . SFOS 15 only supports mesh for AP50 .
    • Sophos Wireless: in general

     

    Mesh on AP55/AP100 can be configured for the following bands:

    • SG: 2.4 Ghz only
    • XG: 2.4 Ghz only
    • Sophos Wireless: 2.4 Ghz and 5 Ghz

     

    AP55/100 includes C and X models.

     

    Kind regards,

     

    Dirk Bolte

Children
Unfiltered HTML