Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 2 replies
  • Subscribers 11 subscribers
  • Views 3971 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

After Enabling (for a test) and disabling Hotspot - need to reboot AP for wireless access

Ekky

Hi all,

I am in 1.8-4 and it seems that when you disable the hotspot (the basic one with just User Acceptance) - you need to reboot (I did it from the WebGUI) the AP to have the Internet access back.

Is this a normal behavior? If yes, maybe it could be good to have a notification to invite to reboot manually the AP?

 

Thanks



This thread was automatically locked due to age.
Parents
  • +1

    Hi,

     

    thanks for reporting this. We tracked this internally with CWIFI-5608 and is already solved. It will be part of one of the next releases. With the fix, you can turn hotspot on and off and do not require a reboot anymore to get internet access back.

     

    Kind regards,

     

    Dirk Bolte

Reply
  • +1

    Hi,

     

    thanks for reporting this. We tracked this internally with CWIFI-5608 and is already solved. It will be part of one of the next releases. With the fix, you can turn hotspot on and off and do not require a reboot anymore to get internet access back.

     

    Kind regards,

     

    Dirk Bolte

Children
Unfiltered HTML