Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 1 reply
  • Subscribers 11 subscribers
  • Views 1470 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to re-apply an access points from Sophos Wireless Beta to UTM v9.4x?

alda

Hi all,

do you have an idea how to re-apply an access points which were connected to Sophos Wireless Beta again with Sophos UTM v9.4x?

I had connected one AP15 and one AP100 to the Sophos Wireless Beta but now I need to re-apply them again with UTM v.9.4x. Unfortunately, these access points  are not to able connect with UTM v.9.4x.

Thank you in advance for your help


alda



This thread was automatically locked due to age.
Parents
  • 0

    Hi,

    the steps are:

    1. turn on AP/connect AP again
    2. make sure it is "online" in Sophos Central
    3. delete it in Sophos Central
    4. wait until it is not listed there anymore (will take up to a minute)

    After that, you should be able to use it with a UTM again.

    kind regards,

    Dirk

Reply
  • 0

    Hi,

    the steps are:

    1. turn on AP/connect AP again
    2. make sure it is "online" in Sophos Central
    3. delete it in Sophos Central
    4. wait until it is not listed there anymore (will take up to a minute)

    After that, you should be able to use it with a UTM again.

    kind regards,

    Dirk

Children
No Data
Unfiltered HTML