Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 12 subscribers
  • Views 1575 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Health Threshold

DMR188

On the sites tab, when clicking on a site and looking at all the AP's, it seems as though if an AP as more than 10 clients it shows red for health status.  I'm just curious what that threshold is to make it red status.  Even though the workload shows somewhat low on most, they are red.  I can see why AP1 would maybe be red as 40+ clients is alot, but these are all AP100s and "should" be ok to handle the load.  Please let me know what you think on this.

Thanks



This thread was automatically locked due to age.
  • 0

    Something along these lines, the Dashboard doesn't match up with those dots.  On the same screenshot above, on the Dashboard it shows the below.  So I'm assuming the "Issue" one is the one with 40+ AP's hanging off it, but you don't really know.  Clicking on the yellow part doesn't take you anywhere to know which one has issues.

    Thanks 

  • 0 in reply to DMR188
    The display doesn't align + its calculation is not correct. Thanks for bringing it up. I created CWIFI-3480 for internal tracking.
Unfiltered HTML