This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

convert APX from Sophos Central to an XG Firewall

Is it possible to move the management of a single APX530 from Central to an XG?

I've gone through 2 bricked APX 530's so far and Sophos has been good about replacing them. Both bricked after they auto upgraded firmware. The tech I spoke with said their were issues with firmware back in 2020.

I'm on my 3rd APX 530 and at times 1-2 of the SSID's stop broadcasting and this takes out my cameras and HVAC controller. It's becoming frustrating.

I'd like to see if moving to an XG to manage could make a difference or something to try before opening another support ticket.

Thanks!

Chris



This thread was automatically locked due to age.
Parents
  • FormerMember
    0 FormerMember

    Hi Chris, Have you noticed AP rebooting or getting stuck before it stops broadcasting those SSIDs? 

    For Central wireless, Support technicians can check the logs from the Access point's backend to see what's going on when APs stop broadcasting these SSIDs.

    For your first query, Yes it's possible to manage one AP from XG. You need to delete the AP from Central. Once disconnected it'll send out heartbeat first to central and if no configurations are found then it'll send a heartbeat to IP 1.2.3.4 which gets intercepted by XG. 

    If XG and AP are not directly connected, Make sure that you add a route in the network for IP 1.2.3.4 for XG's reachable IP address so the XG can receive heartbeat from the AP. 

  • Thank you this worked for me.

Reply Children
No Data