Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 1 reply
  • Subscribers 12 subscribers
  • Views 1668 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

APX AP + XGv18 - Bridge to Ethernet missing from Access Point

ArtL

I'm setting up a XGv18.03 with two APX530 access points and noticed that when setting up "Bridged to AP LAN" when creating the SSID, the option "Bridge to Ethernet" does not exist for the access points as outlined by the following article: https://support.sophos.com/support/s/article/KB-000035549?language=en_US

Therefore there is no bridged interface created for the Wireless to be bridged to the LAN.  Is this something new or is there something broken? 



This thread was automatically locked due to age.
Parents
  • FormerMember
    0 FormerMember

    Hi ,

    Thank you for reaching out to the Community! 

    The KB article you linked only applies to the firewall models (XG -W series) with an inbuilt wireless module. 

    If you are trying to bridge the wireless network to LAN on the firewall model without the inbuilt wireless module, you just have to select option bridge to AP LAN. 

    Check out the following document for more info: Add a wireless network.

    Thanks,

Reply
  • FormerMember
    0 FormerMember

    Hi ,

    Thank you for reaching out to the Community! 

    The KB article you linked only applies to the firewall models (XG -W series) with an inbuilt wireless module. 

    If you are trying to bridge the wireless network to LAN on the firewall model without the inbuilt wireless module, you just have to select option bridge to AP LAN. 

    Check out the following document for more info: Add a wireless network.

    Thanks,

Children
No Data
Unfiltered HTML