Thread Info
  • State Verified Answer
  • Replies 15 replies
  • Subscribers 7 subscribers
  • Views 4143 views
  • Users 0 members are here
Options
Suggested

[NC-52441] Unable to update to EAP1 refresh 1

lferrara

I tried to upgrade from EAP1 to EAP1 refresh 1 and from syslog.log I saw:

Oct 31 18:27:56 (none) auth.err nsgsig-verify: /sdisk/u2d/downloads/SW-18.0.0_EAP1-Refresh1.SFW-113.gpg: not an NSGSIG file
Oct 31 18:35:06 (none) auth.err nsgsig-verify: /sdisk/u2d/downloads/SW-18.0.0_EAP1-Refresh1.SFW-113.gpg: not an NSGSIG file

From the web interface or log viewer, nothing helpful.

It seams I am alone.

Regards

Parents Reply Children
  • 0 in reply to LuCar Toni

    As reported, the XG seems to unable to install the new fresh release. I decided to upload and XG does not boot anymore (I took a picture with the mobile).

    The only way to boot was to move the Xg to my tv, connect a vga cable, keyboard, check what happened and reboot by using GRUB  and select the previous version v18. Everything worked. Then I powered off the machine, powerd on again and took time from the boot to the grub menu with a stopwatch (all my tv are wall-mounted).

    Moved XG and the keyboard to the other room and after 10 secs I used the upper key to select the previous Firmware version and pressed ENTER.

    [:D]

    To investigate, some dev can contact me and I will give them access to XG.

    Regards

  • 0 in reply to lferrara

    Hi lferrara,

              Thanks for your feedback, I will send you PM for more details purpose.

Unfiltered HTML