I made already a post about the 10G nic i bulid into which is not working as it should. So i thought I'd use the 2 bulit in SFP ports. I connected a cable to the SFP+ from my switch and nothing.
I thought maybe the could not communicate so I connected a SFP switch and also nothing. My SFP+ RJ45 module also won't work.
I checked dmesg and I see nothing wrong.
Do the SFP ports work with direct cable? Do I need SFP modules? How did u guys connect this?
[ 6.804569] igb_nm 0000:09:00.0: added PHC on eth5
[ 6.804570] igb_nm 0000:09:00.0: Intel(R) Gigabit Ethernet Linux Driver
[ 6.804571] igb_nm 0000:09:00.0: eth5: (PCIe:2.5GT/s:Width x1)
[ 6.804572] igb_nm 0000:09:00.0 eth5: MAC: c8:4f:86:03:2e:ad
[ 6.804575] igb_nm 0000:09:00.0: eth5: PBA No: Unknown
[ 6.804588] igb_nm 0000:09:00.0: LRO is disabled
[ 6.804589] igb_nm 0000:09:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
[ 6.892358] igb_nm 0000:0a:00.0: added PHC on eth6
[ 6.892359] igb_nm 0000:0a:00.0: Intel(R) Gigabit Ethernet Linux Driver
[ 6.892360] igb_nm 0000:0a:00.0: eth6: (PCIe:2.5GT/s:Width x1)
[ 6.892361] igb_nm 0000:0a:00.0 eth6: MAC: c8:4f:86:03:2e:ae
[ 6.892565] igb_nm 0000:0a:00.0: eth6: PBA No:
[ 6.892592] igb_nm 0000:0a:00.0: LRO is disabled
[ 6.892593] igb_nm 0000:0a:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
[ 7.300740] igb_nm 0000:0b:00.0: added PHC on eth7
[ 7.300741] igb_nm 0000:0b:00.0: Intel(R) Gigabit Ethernet Linux Driver
[ 7.300742] igb_nm 0000:0b:00.0: eth7: (PCIe:2.5GT/s:Width x1)
[ 7.300743] igb_nm 0000:0b:00.0 eth7: MAC: c8:4f:86:03:2e:af
[ 7.300948] igb_nm 0000:0b:00.0: eth7: PBA No:
[ 7.300974] igb_nm 0000:0b:00.0: LRO is disabled
[ 7.300975] igb_nm 0000:0b:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
[ 7.314945] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[ 7.314946] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 10.311443] igb_nm 0000:02:00.0 Port1: renamed from eth0
[ 10.333148] igb_nm 0000:03:00.0 Port2: renamed from eth1
[ 10.361035] igb_nm 0000:04:00.0 Port3: renamed from eth2
[ 10.393016] igb_nm 0000:05:00.0 Port4: renamed from eth3
[ 10.417053] igb_nm 0000:06:00.0 Port5: renamed from eth4
[ 10.445028] igb_nm 0000:09:00.0 Port6: renamed from eth5
[ 10.473021] igb_nm 0000:0a:00.0 Port7: renamed from eth6
[ 10.508997] igb_nm 0000:0b:00.0 Port8: renamed from eth7
Edited TAGs
[edited by: Raphael Alganes at 5:55 AM (GMT -7) on 27 Aug 2024]
