INTERNAL NETWORK ACCESS TO EXTERNAL IP

Question

Hello, we have implemented the Sophos firewall and we are facing a serious problem, no matter how much we configure the internal network IPs, it does not access the external IP, 
Could you help us?
Grateful

Bharat J · Accepted Answer

Hi ASP A&Ccedil;AO SOCIAL DO PLANALTO 
 Thanks for the updating the post, after we adding LAN Zone on WAN-LAN firewall rule web server was accessible on LAN with Public IP. 
 Thanks and Regards

apijnappels · Answer

Not sure what the problem is since your description is somehwat limited. 
 If you cannot get out to the internet you need to create SNAT rule to masquerade the internal addresses 
 If you need to get back to the inside of the firewall through an external public IP, you need a normal DNAT rule for access from every other internet connection, but you'll need a full NAT rule to reach it from within your own LAN.

apijnappels · Answer

Configure a NAT rule as follwed: 
 At 1, configure your WAN interface, at 2 configure MASQ at 3 configure the internal host. 
 You also need a firewall rule to allow the traffic, basically you need to allow LAN network (source) to internal server on specified ports.

INTERNAL NETWORK ACCESS TO EXTERNAL IP

Top Replies