Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 41 subscribers
  • Views 872 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

XG135 Rev3 Speedstep support and fan speed

MikeyS

Good morning,

I've got a XG135 Rev3 that I'm planning on installing XG Home on.  Is there speedstep support within the BIOS and is the fan supposed to be controlled by PWM depending on temps etc?

It's been delivered with pfsense installed on the unit and is running very hot atm and the fan speed doesn't seem to adapt.

Are their any BIOS updates avaliable?



This thread was automatically locked due to age.
Parents
  • 0

    I doubt there are any updates available for this unit  -- I don't recall there ever being a BIOS update for the XG or XGS units at all.  Given this is actually not even a licensed unit, etc. I would not bother with a feature request -- and there certainly isn't any support for it (in its current state).

    I've reused old XG and SG boxes before for home and lab uses, and that's fine, but there's no support for the HW when used that way (with Home SFOS licenses or 3rd party OS).

    CTO, Convergent Information Security Solutions, LLC

    https://www.convergesecurity.com

    Sophos Platinum Partner

    --------------------------------------

    Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries.  Use the advice given at your own risk.

Reply
  • 0

    I doubt there are any updates available for this unit  -- I don't recall there ever being a BIOS update for the XG or XGS units at all.  Given this is actually not even a licensed unit, etc. I would not bother with a feature request -- and there certainly isn't any support for it (in its current state).

    I've reused old XG and SG boxes before for home and lab uses, and that's fine, but there's no support for the HW when used that way (with Home SFOS licenses or 3rd party OS).

    CTO, Convergent Information Security Solutions, LLC

    https://www.convergesecurity.com

    Sophos Platinum Partner

    --------------------------------------

    Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries.  Use the advice given at your own risk.

Children
No Data
Unfiltered HTML