Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

WAF non-standard ports: 503 Service Unavailable

Hi,

I have set up a new Web server protection rule following this guide. Everything works fine using port 80, but when I change the port to 1001, I get 503 Service Unavailable:

Web server:

IIS (Windows 11). Binding: Type: HTTP, IP address: all unassigned, Port: 1001, Host name: none.

Web server

Firewall rule

This is just a simple test, serving a very basic page.

"My-Laptop" is an IP host record, specifying the IP address (that I have confirmed is correct).

I've followed a Sophos community page to restart Tomcat from the Advanced Console: service tomcat:restart -ds nosync.

I've recreated the web server record and firewall rule, specifying the non-standard port just in case something has been cached.

I've added (and removed) the host name test.mydomain.net to IIS.

Windows firewall is off.

I'm out of ideas.

If anyone could shed some light on the problem, I'd be very grateful if you could share your thoughts.

Thank you in advance.

W.



This thread was automatically locked due to age.
Parents Reply
  • It appears the link you provided is for your hardware devices. I am running on ESXi.

    I am also a home user. I've managed to get access to Sophos Central, but I've since read there is no need as home user licensing is automatic now. However, this seems to mean that I cannot access downloads in the prescribed way. Therefore, I believe I will have to remain on GA until MR is pushed out - which I've read could be months.

    Can you confirm if there is a way for me to download this MR. Failing that can anyone help with my issue against the GA firmware?

    Thanks again.

Children