Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Only 100 mbps instead of 1gig getting trough firewall modem Connection

Hi everyone,

I set my Firewall Wan Port to 1000 mbps Full-Duplex with Auto-negotiated enabled.

I thought the solution was to set the WAN bandwidth to 1000 Half-Duplex but there is no option (only 10 HD, 10FD, 100 HD, 100 FD and 1000 FD)
My Modem (Vodafone Station) Lan1 where the Firewall is connected shows 1 Gig.

Sadly if i make a speedtest it shows only nearby 100 mbits.
We have a 1 gig bandwidth from Vodafone.

I tried several settings to get the 1 gig, but every speedtest was under 100 mbits.

There are no options to change the bandwidth at the Vodafone Station.

Thanks in advance for the help



This thread was automatically locked due to age.
Parents
  • Hi, what kind of hardware are you using your Sophos Firewall on? Which version? Do you use web-filtering and/or IPS?


    Managing several Sophos firewalls both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

  • hi, thanks for your fast answere Im using a CWK X86-P1 Mini PC   

    Here the specs i found, its the N3160 Chip
    The Router shows 1Gig connected to Lan1, same as the "Router" after the FW, so i think the Ports of the Mini PC are 1Gig.

    Im only using Firewall rules and Web filtering, IPS is disabled


    Port settings are default

    If you need More infos ask me, i try my best to discribe

Reply
  • hi, thanks for your fast answere Im using a CWK X86-P1 Mini PC   

    Here the specs i found, its the N3160 Chip
    The Router shows 1Gig connected to Lan1, same as the "Router" after the FW, so i think the Ports of the Mini PC are 1Gig.

    Im only using Firewall rules and Web filtering, IPS is disabled


    Port settings are default

    If you need More infos ask me, i try my best to discribe

Children
  • Just for firewall this chip should be able to handle much more than 100 mbps. Have you tried unchecking "Use web proxy instead of DPI engine"?

    Did you install Sophos Firewall bare-metal on this machine or did you virtualize it? If bare-metal it could be an issue with the Realtek NIC's.

    And which version of Sophos?


    Managing several Sophos firewalls both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

  • I tryed but it did not helped

    I installed it directly on the machine.

    What can i do if it is a Realtek NIC Issue

    The Version is SFVH (SFOS 19.5.3 MR-3-Build652)