WAN LINK Load balancing and failover

Hi Tharindu,

Thank you for reaching out to Sophos Community.

Have you tried to use any how-to videos, documentation, Sophos Assistant, or KBA to try to check the issue?

To verify, once the primary goes down, it’ll fail over to the two backup lines with load balance( sharing of traffic). However, this would not be possible in the WAN link manager.

You may try to do the following if this results as you intended.

Configure Gateways

Create an SDWAN Profile

1. Profile 1 configured as normal WAN link Manager
2. Profile 2 is configured as Load balancing for ISPs 2 & 3.

Kindly note that the load balance won’t add up the bandwidth for ISPs 2 & 3.

Hi Erick,

Yes, I went through the KBA as well but didn't resolve the issue.

However, creating two SD-WAN Profile seems to work but when we come to the SD-WAN policies we have to create two policies right

?

And another thing is in the WAN link manager all the links should be in the active state.

TIA

Hi Tharindu,

Yes, for both questions. Kindly try to see if it’ll work as intended. 

Hi Erick,

Sure I'll do the same and update the thread as soon as possible.