Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 40 subscribers
  • Views 1597 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

IPSec S2S Policy Based VPN (btw. XG and OPNSense) - Routing Problems

David Lorenz

Dear Community,

we have a customer with a XG Firewall in HQ and OPNSense in BA. Them are connected with IPSec PB S2S VPN. There is a older solved Case for more informations:

 https://community.sophos.com/sophos-xg-firewall/f/discussions/141557/need-help-with-client-ipsec-vpn-connect-in-to-site2site-vpn-ipsec-tunnel-policy-based 

Everything works fine for some minutes. After some minutes the VPN-Network lights red (look at the screenshot).

We need this configuration because they want to use the sophos connect client to connect from home office to the hq (XG) and then route also the traffic over the S2S VPN to BA (OPNSense). They have some Network drives in HQ and BA. Thats the reason why we need this configuration.

Like I said. For some minutes the routing workes fine. So it workes in principle. But not stable. Wenn I cut the connection and reconnect it everything is green.

Maybe someone of you has a idea how to solve this problem.

Thanks in advance and have a nice week!



This thread was automatically locked due to age.
Parents Reply Children
No Data
Unfiltered HTML