Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Verified Answer
  • +2 person also asked this people also asked this
  • Locked Locked
  • Replies 18 replies
  • Answers 1 answer
  • Subscribers 49 subscribers
  • Views 12246 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos Firewall: v19.0 MR2: Feedback and experiences

LuCar Toni

Release Post:  Sophos Firewall OS v19.0 MR2 is Now Available 

Old v19.0 MR1 thread:  Sophos Firewall: v19.0 MR1: Feedback and experiences 

https://docs.sophos.com/releasenotes/output/en-us/nsg/sf_190_rn.html

Keep in Mind: V19.5 GA cannot be "downgraded to V19.0 MR2". 



This thread was automatically locked due to age.
Parents
  • 0

    Hi!

    The followings are really annoying:
    1., LAG interface creation, you need to assign an IP-address, You cannot create LAG interface without IP-address assignment. ( Use-case What if just want to use VLANs on the LAG device, why need to assign ip address in the first place ? ) WHY?
    2., Not possible to disable the IP-ALIAS on the interface: The only way is to remove/delete, but it casues "remove all" assoicated NAT rules. WHY ?
    3., DHCP Server: You define the IP-Pool, then save it. You want to add static leases within the IP-Pool. You cannot add, because you can only add "static lease" outside the IP-POOL. WHY?
    4., Interface changing the MTU/Speed causes to remove all the "ip addresses" from the interface and resets back to "empty". WHY ?

  • 0 in reply to MysteriousDT

    Most of those point will be addressed soon. 

    __________________________________________________________________________________________________________________

Reply Children
No Data
Unfiltered HTML