I'm experiencing sudden break ups witht he connection with my XG135w.
The configuration is as follows: ISP model with optical connection - unmanaged switch (with nothing else connected except ISP modem and XG) - XG - couple of switches with PoE and two Ubiquiti AP.
It all started on friday last week when I wanted to configure my two Ubiquiti APs with additional Guest WiFi network (with our existing one). After that the Ubiquiti APs started breaking up, so I deleted the newly created Guest WiFi, but after this I realised that our XG is always breaking up the connection to the internet. COuple of times it was WAN interface down, then it was okay but the connection was just broken for couple of seconds (without messaging that the WAN is down), then it went up for another couple of minutes, than breaks and so on (often with the message DNS_PROBE_FINISHED_NXDOMAIN after trying to refresh a site or to open a new one).
We have a ESXi on the network that has a AD virtual machine. The XG has a static DNS IP address set.
I'm not sure where to look at. It was all running smoothly before this Ubiquiti thing. Tried one more time to play with MTU (it was 1500) or to add a second rule to the WAN link manager for going down, but without help.
Hey Shteki,Thank you for the update, use global DNS 18.104.22.168 in DNS 1 preference following with the mentioned one. Under the WAN Link manager under the failover gateways > edit the failover rules and with…
here are the pictures of the setting:
And the screenshot of the CLI (I've run the command "cat dgd.log |grep dead")
Hey Shteki,Thank you for the update, use global DNS 22.214.171.124 in DNS 1 preference following with the mentioned one. Under the WAN Link manager under the failover gateways > edit the failover rules and with the "AND" condition also add your interface gateway too.Observe this and see if that has improved the situation.
Thanks & Regards,_______________________________________________________________
Vivek Jagad | Technical Account Manager 3 | Cyber Security Evolved
Sophos Community | Product Documentation | Sophos Techvids | SMSIf a post solves your question please use the 'Verify Answer' button.
you mean something like this:
Yup Shteki, that's right !!
I've changed it, I'm going to bserve it during the next couple of hours and reply here with the result.
Sure, and have you also updated the DNS preference under the DNS section ? As per the screenshot the DNS 1 preference is set to 10.27.27.6 , So would suggest keep the global DNS 126.96.36.199 as DNS 1 and following with that DNS 2 as 10.27.27.6 !! Shteki
Thank you, I've just updated this too, going to see is it going to help.
Sure, you're welcome !!
sadly, I didn't help, my colleagues told me that for the last hour they had 4 short breakdowns...
Breakdown - WAN link, right ?
The WAN doesn't report now breaking up, but the internet connection is breaking up all the time. The colleagues see when their site suddenly stops loading or if they have a VPN connection to another external site and the connection just hangs up.
Hello Shteki, So any authentication method used for the users who are facing the disconnection ? How many number of users are impacted ? Can you share the complete graph from the diagnostics > system graph...