VLAN tag on the WAN port using PPPoE ( UFB NZ )

Question

Good morning / Day / Evening all, 
 I am trying to set up the Sophos home version V19 at home. 
 I have created a VLAN 10 with PPPoE and it shows that it is connected and I have my static IP as I would expect but I am not getting any traffic. 
 Back in the Cyberoam days we had to create a dummy port, do we have to do that or doe we have to bind the Valn port 2.10 to Port 2 somehow. 
 The only instructions for the VLAN on the WAN port is for DHCP and Static IP. My ISP only does PPPoE 
 Any help appreciated.

Vishal_R · Accepted Answer

Hi John Mitchell1 Dummy IP configuration is not required as of now with SF OS on the main physical interface and you may directly add the VLAN-based interface with the required zone with the required IP assignment (like Static, DHCP, or PPPoE). Example: Navigate to Network > Interface > Click on Add Interface > Add VLAN > Fill in the required information and select the required physical port, zone and assignment Reference Snapshot: If the configuration is done as per above then confirming the syslog.log will help to get more info for PPPoE handshake status.

VLAN tag on the WAN port using PPPoE ( UFB NZ )

Top Replies