Hi everyone, I really need some help. I've already tried some KBs but no luck.
I'm having some trouble configuring my branch office users to connect to my Active Directory Server on the head office site.
I have already set up IPSec VPN from Head Office (Sophos XG 115) to Branch Office (Sophos XG 105 without license).
I have already followed the KBs: https://docs.sophos.com/nsg/sophos-firewall/19.0/Help/en-us/webhelp/onlinehelp/AdministratorHelp/Authentication/HowToArticles/AuthenticationAllowSTASOverVPN/index.html#introduction
What is happening:
By the time I login in the computer on the branch office (using a domain user), Sophos Firewall at Head Office gets the IP from Sophos Firewall Branch Office and not the IP from the workstation. After logging in, the browser pops up the login page from sophos firewall from Head Office. I can log through it normally, but the transparent authentication won't work.properly.
Sophos Firewall on the Head Office site: 192.168.1.1
Sophos Firewall on the Branch Office site: 192.168.5.1
Workstation on the Branch Office site: 192.168.5.20
Domain controller: 192.168.1.11
For the Head Office network users, it is everything ok with STAS. I`ve already set up the Servers, Services and STAS tab below like my Head Office Firewall.
Head Office Sophos Firewall:
Here it should be 192.168.5.20.
What can I do so Sophos Firewall gets the correct IP 192.168.5.20 from the workstation on Branch Office site?
Thank you guys.
Hello techblue,Thank you for reaching out to the community, is client auth for VPN zone enabled under the administration > device access ?
Thank you for reaching out to the community, On STAS you can verify under "Sophos Appliance" Field edit and check whether "Enable Subnet based filter" is applied or not as per the below snapshot reference
Thanks and Regards
"Sophos Partner: Infrassist Technologies Pvt Ltd".
If a post solves your question please use the 'Verify Answer' button.
Hi Bharat J
I did like the snapshot I've just sent, but nothing has changed. The HO Firewall keeps picking the user IP 192.168.1.1 :/
What else should I review?
This is really driving me crazy.
Please enable filter for both network as you did for 192.168.5.0 on STAS software
Still no success :/
Please restart the STAS Service from AD server and from Sophos firewall under CONFIGURE > System service > Services
Just to update this post;
As we talked before, restarting the service didn't solve the problem.
Hello techblue,Can you once verify the configs from the best practice guide of STAS: https://community.sophos.com/sophos-xg-firewall/f/recommended-reads/125318/sophos-xg-firewall-best-practice-for-stas
Thanks & Regards,
Vivek Jagad | Technical Account Manager 3 | Cyber Security Evolved
Sophos Community | Product Documentation | Sophos Techvids | SMSIf a post solves your question please use the 'Verify Answer' button.
Please share the current firmware version running on Sophos XG
It's everything running well. I have my local users using STAS for many years. The STAS on AD Server gets the IP 192.168.1.1 and not the workstation IP from Branch Office. We have tried even connecting through CAA on BO, but stil HO gets IP 192.168.1.1. Sophos Firewall from BO won't appear in STAS as well.
SFOS 17.5.17 MR-17-Build837
Would suggest get this thoroughly investigated with Sophos support !! techblue
techblue between SFOS 17.5.17 MR-17-Build837 is declared EoL 30-NOV-2021*
Hi Vivek Jagad
I'm aware of that since last year. I want to set this because the BO has only 4 computers and Sophos XGS 87 is expensive compared to Sophos XG 85. I don't want to make a high investiment in a hardware to use only for 4 computers in the branch office. Do you get it?As I have a licensed Sophos XG 115 with verson (SFOS 19.0.0 GA-Build317) on Head Office I would like to change this scenario like I said before.
I want the Branch Office users getting internet access over IPSec VPN Tunnel from Head Office. This is happing now, however only through captive portal. If possible I'd like to make it work through CAA at least. That'll work very well for me.
Thanks & Regards
Hello techblue,I understand. But after August 17, 2022 (this is the end of support date) you'll no longer be able to get the support assistance. So, just wanted to ensure you have the right information. And regarding the CAA, what is the error you are receiving?
I see. Thank you for the information.
In regards to CAA, I don't receiving any error. The CAA connects correctly in BO and the user appears in "Current Activties". However it doesn't get internet conection from HO. It is like the HO's firewall won't "see" this connection coming from BO. Understand me?
Does it work or should I missing some configuration?
What do I need to do so Branch Office's Firewall will send CAA user information to HO? I need to match user in the firewall rule because I have more than one web policy for the users.
Thanks & Regards.
Hey techblue, So you mean user authenticates fine it just does not get internet access right ? So the IPsec is full tunnel or limited to the LAN subnets ? And do you have a rule in place in HO VPN to WAN ?